04-13-2014, 09:50 AM
#1
User Info
I will be setting a 24 mm TGN synthetic and need advice as to proper loft size for this knot. Thanks

0 43
Reply
 04-13-2014, 12:50 PM
#2
User Info
You might consider using a small amount of silicone adhesive and experiment with loft settings to get it to where you want it. I have done this several times with various knots. The silicone will hold it in place but allow you to pull it out to make adjustments before making the placement permanent with an epoxy.

44 486
Reply
 04-13-2014, 01:16 PM
#3
User Info
(04-13-2014, 09:50 AM)Ramsay Wrote: I will be setting a 24 mm TGN synthetic and need advice as to proper loft size for this knot. Thanks

You might want to look at this thread.

http://shavenook.com/thread-ever-ready-c...-synthetic

1 2,827
Reply
 04-13-2014, 09:17 PM
#4
User Info
That's the loft I used for my 24mm TGN knot also and it's just about perfect.

32 6,445
Reply
 04-14-2014, 09:03 AM
#5
User Info
Gary's recommendation is spot on! Good luck! Smile

82 21,056
Reply
Users browsing this thread: 1 Guest(s)