09-10-2014, 09:12 AM
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
I have been receiving a lot of emails and phone calls regarding the progress of the Huntlee razor so thought I would post a brief update.

1) There is a bit of a Mongoose connection. The Machine shop that is making the Mongoose Razor will also be making the Huntlee Razor. Bruce Weber, Matt Glass and I are friends. Bruce stopped by my shop last winter, liked the prototype, and has been helping Lee and me make it a reality.

2) The razor will be fully machined out of 316 stainless steel and it will be a 3-piece razor with standard threading. It will utilize the Kai Captain Mild and Feather Pro blades.

3) The Stainless Steel prototypes are being worked on as I type. The razor will be very similar to our drawings and resin model but, we did have to make a few minor modifications so that it could be machined.

4) We do not know when it will be released but it will be in the not too distant future. We first need to test and approve the prototypes. It is likely a few months off yet.

48 19,039
 09-10-2014, 09:13 AM
  • Agravic
  • Emeritus
  • Pennsylvania, USA
User Info
Thanks for the update, Phil.

Many are eagerly anticipating the arrival of the Huntlee razor.

102 18,696
 09-10-2014, 09:21 AM
  • slr31
  • Senior Member
  • Garden City, India
User Info
Phil, that is great news and my well wishes to you for a successful product.

The delay could be a blessing in disguise due to the additional knowledge of the Mongoose design.

83 562
 09-10-2014, 09:35 AM
User Info
Great news thank you. Put me on the list any list.

129 13,364
 09-10-2014, 09:39 AM
User Info
that is really good news phil, thanks for the update and please also put me on any list. thanks again and have a great day! brian (kbh2o)

38 47
 09-10-2014, 09:41 AM
  • Giorgio
  • Senior Member
  • Pennsylvania, US
User Info
Thanks for the update Phil! Excellent news, and I eagerly await the release

34 1,627
 09-10-2014, 09:57 AM
User Info
Good luck Phil and thanks for the update.

84 1,505
 09-10-2014, 10:14 AM
User Info
Thanks for the update Phil, very good news indeed!

96 2,592
 09-10-2014, 10:29 AM
User Info
Thanks for update, put me in batch 1 Biggrin

14 250
 09-10-2014, 11:00 AM
User Info
Thanks for the update.This kinda reminds me of Santa & the elves getting ready for Christmas Biggrin

20 441
 09-10-2014, 11:31 AM
  • mjlinane
  • Afflicted with SSRAD
  • Round Rock, TX
User Info
Excellent news!! Looking forward to it!

6 76
 09-10-2014, 11:58 AM
User Info
This is great news. I thought I felt millions of DE razors and blades start quaking in fear.

Single Edge For Life! Laughing1

31 8,059
 09-10-2014, 12:22 PM
  • TheMonk
  • Super Moderator
  • Porto, Portugal
User Info
Reallyyyy looking forward to it! Biggrin

26 5,006
 09-10-2014, 12:23 PM
User Info
Great news!! Sitting on the edge of my seat right now.

4 952
 09-10-2014, 02:15 PM
  • Sully
  • Super Moderator
  • Cedar Park, Texas
User Info
(09-10-2014, 09:35 AM)slantman Wrote: Great news thank you. Put me on the list any list.

+ a thousand!

Put me on the list too please.

10 1,607
 09-10-2014, 02:31 PM
  • ojinsa
  • Senior Member
  • San Antonio
User Info

27 860
 09-10-2014, 02:45 PM
User Info
Excellent . I am sure that it will be ready before the cobra stock:-)
I can't wait to see the prototype pictures

61 3,076
 09-10-2014, 03:22 PM
User Info
(09-10-2014, 02:45 PM)Cricket203 Wrote: I am sure that it will be ready before the cobra stock:-)

Good one!

Thanks for the update Phil, congrats on the progress, we're all looking forward to it.

3 202
 09-10-2014, 03:37 PM
User Info

1 45
 09-10-2014, 04:56 PM
User Info
Dear Santa....

11 1,234
Users browsing this thread: 1 Guest(s)