11-28-2014, 10:20 AM
#1
User Info
Hello everyone, I have completed a few brushes and razor handles over the past week.

Available HERE

Here is a handmade laminated Diamondwood shaving brush with a 25mm Super Badger Fan knot. The knot is not glued in yet, so the loft can be set at 48mm or higher. It is pictured at 50mm.

There is an option for the handle alone.
Knot opening 25.3mm
Knot depth 18.70mm
Handle height 59.2mm (2.3")
Handle width 35.3mm (1.4")

[Image: UBWgWMn.jpg]

[Image: BinlnYT.jpg]

Here is a handmade Cocobolo family handle with a 27mm 2 band Finest badger knot. The knot is not glued in yet, It is pictured at 50mm.

There is an option for the handle alone.

The knot hole is 26.5mm
Hole depth is 17.5mm
Handle height is 56.98mm (2.24")
Handle width is ~36,, (1.4")

[Image: MJQFTw2.jpg]

Antique Gold Acrylic Shave Handle that is drilled for a 25mm Synthetic knot.
Matching Antique gold razor handle with chrome trim and head.

[Image: LXRJw4b.jpg]

Here are a few recently sold items. I am out of the Mach 3 / Olive wood razors, but more are on the way.

[Image: U4YItGp.jpg]

[Image: NcmQzRO.jpg]

[Image: ST2dNvH.jpg]

Thanks for looking!

31 1,800
Reply
 11-28-2014, 10:35 AM
#2
User Info
Looks Great Mike !

6 1,224
Reply
 11-30-2014, 02:18 PM
#3
User Info
Great work Mike,just beautiful......Ernie

20 441
Reply
 11-30-2014, 03:01 PM
#4
User Info
Thanks, Eric and Ernie.

I have 4 more in various stages. A Zebrawood, 2 cocobolo, and an Ebony/mahogany segmented that I may just have to keep for myself Biggrin

31 1,800
Reply
 12-03-2014, 06:51 PM
#5
User Info
(11-30-2014, 03:01 PM)Bowhnter Wrote: Thanks, Eric and Ernie.

I have 4 more in various stages. A Zebrawood, 2 cocobolo, and an Ebony/mahogany segmented that I may just have to keep for myself Biggrin

I've been looking for a Cocobolo DE handle. When do you think you'll be posting some pics?

Have you done any in Snakewood? It's my all time favorite exotic wood.

1 108
Reply
 12-03-2014, 07:39 PM
#6
User Info
The current cocobolo is sold, but I have 2 about finished. Waiting on new knots.
They are kind of different design so if you want a preview, pm me.

I have not done snakewood, I do see it is expensive and can be hard to work with. I might be up for a challenge after the holidays Cool

31 1,800
Reply
 12-03-2014, 07:47 PM
#7
User Info
(12-03-2014, 07:39 PM)Bowhnter Wrote: The current cocobolo is sold, but I have 2 about finished. Waiting on new knots.
They are kind of different design so if you want a preview, pm me.

I have not done snakewood, I do see it is expensive and can be hard to work with. I might be up for a challenge after the holidays Cool


Snakewood is a bit more dense than Cocobolo. I used to make pool cues about 10 years ago. The cue I made for myself was a base of Tulipwood, with Snakewood and Ebony inlays.

If your up for it after the holidays, shoot me a PM. I'd definitely be interested in a Snakewood DE handle.

1 108
Reply
 12-05-2014, 12:01 PM
#8
User Info
Here are some new items made available here.

Note, there will also be additional DE razor handles completed next week.

Bocote wood Mach 3
[Image: 6kbx1jA.jpg]

Olive wood Mach 3
[Image: oNJwhU0.jpg]

Ebony / Mahogany segmented 26mm synthetic

There is an option for the handle alone.
Knot opening 25.3mm
Knot hole depth 19mm
Handle height 69.5mm (2.75")
Handle width 35.3mm (1.2 - 1.5")

[Image: L5xsqca.jpg]

The 2 below are currently not listed and only available by PM until new knots get here.

They are shown with TGN Super Badger Fan at 25mm x ~48 loft, but I only have one of those knots in stock.
Both are available as handle alone.

The Zebrawood

Knot opening 25mm
Knot hole depth 18.7mm
Handle height 53.1mm (2.1")
Handle width ~33.5mm (1.3")

[Image: VKMTfuZ.jpg]

The Cocobolo

Knot opening 25.2mm
Knot hole depth 19.1mm
Handle height 50mm (2.0")
Handle width ~33.5mm (1.3")

[Image: 9Sg5h27.jpg]

31 1,800
Reply
 12-09-2014, 06:57 AM
#9
User Info
A quick update as the additional knots have arrived.

The Zebrawood shown with a 25mm HMW
The Segmented with a 26mm Finest Fan
The Cocobolo with a 26mm Finest

A couple new razors as well.
(the mach 3 handles in the post above are sold)

Available here

[Image: Zry8wEz.jpg]

[Image: wLDADLR.jpg]

Thanks for looking

31 1,800
Reply
 12-14-2014, 02:23 PM
#10
User Info
Here is a crude phone pic, but I just completed this custom order set on the right. I have another set of blanks for stock of anyone is interested. This material really looks good, it is an antique gold.

[Image: 99XcoL1.jpg]

31 1,800
Reply
 01-01-2015, 04:01 PM
#11
  • mikeperry
  • Senior Member
  • St Louis via the UK
User Info
Hi Mike

Beautiful work and wishing you all the very! best Cheers

Take care, Mike

Edit: Fixed "Smilies" icon...

23 1,872
Reply
 01-01-2015, 04:16 PM
#12
User Info
wow, that first brush is beautiful!!!!

40 5,830
Reply
 01-01-2015, 05:44 PM
#13
User Info
Very beautiful stuff Mike

1 1,975
Reply
 01-01-2015, 07:38 PM
#14
User Info
Thanks all, and Mike Perry, good to see you!

31 1,800
Reply
 01-06-2015, 12:49 PM
#15
User Info
op update...All items that were on Etsy were just reserved/purchased. Basically every brush and razor I had available. Shaving items wiped out except these that I had not listed yet,

These are all Black Palm, and are ready for my last finish step sometime this week.

If anyone is interested let me know, other wise they will also go with that order.
PM only as they will not be listed on Etsy

Thanks for looking!

Wood: Black Palm
The brush is a 25mm pictured with a TGN Finest @ ~48 loft. (not glued in so other knots are also available)



[Image: 4gSKmbP.jpg]

[Image: 79TX1qi.jpg]

31 1,800
Reply
Users browsing this thread: 1 Guest(s)