05-05-2018, 08:23 AM
#1
User Info
I have some 19th Century lather catcher razors with their original wedge blades.  I'd like to give the razors a go with those old wedge blades, but I doubt the blades are shave ready.  So my question:  How do I make those old wedge blades shave-ready?  I don't shave with a straight razor, so I have no honing capacity/experience.  Do I send the blades out for honing like I would a straight?  Or are 19th Century wedge blades sharpened differently?

10 187
Reply
 05-05-2018, 11:31 AM
#2
User Info
Interesting..... Cool  Got pictures,,,,, Thumbsup

0 265
Reply
 05-05-2018, 11:55 AM
#3
User Info
As far as I can tell the process of sharpening a wedge blade should be similar to honing a straight - the profile shown in old patent drawings are near identical to the profiles of straights. However; unlike a straight you only have a short stub of blade without a handle, something that will make it a lot more tricky to sharpen it without proper tools.

A lot of patents for wedge style razors include a separate handle for sharpening and honing, as can be seem mounted on the back of this old Kampfe:
[Image: KampfeSafetyRazor.jpg]

Other options included separate honing devices, one of the more known ones belongs to the Rolls razor:
[Image: RollsRazor.jpg]

3 5,264
Reply
 05-05-2018, 12:32 PM
#4
User Info
I use a piece of tape when I honed a wedge blade. The tape gives you some control while working with stones. Treat the blade just like a straight razor. I lifted the picture but is exactly how a did it

[Image: 3w11l2A.jpg]

8 163
Reply
 05-05-2018, 04:50 PM
#5
User Info
I do the same as above but tape one of these this bamboo skewers to the back to give a little more rigidity

3 812
Reply
Users browsing this thread: 1 Guest(s)