10-10-2018, 09:19 PM
User Info
Allow me to present the "Brush, Experimental, version Alpha" - or "X-A" for short.

[Image: 2018-10-06%2B19.32.38.jpg]
The knot is inexpensive Chinese badger from source who seems to mostly sell budget make up brushes and wigs. The handle is a piece of two-by-two construction lumber, good Norwegian spruce most likely, that have been ageing in my shed for a few years now. The finish is a mineral oil and CA glue finish, which - if my sources online can be trusted - should be at least somewhat water resistant.

[Image: 2018-10-06%2B19.32.51.jpg]
It's a 19mm knot with a "free loft" (above the handle) of approximately 55mm. The handle itself is about 45mm tall and 40mm in diameter... perhaps a little chubby, but the main objective with "Brush, Experimental, version Alpha" is to see how the knot works. Since I fully expect and even plans to de-knot it at some point and transfer the knot to a future "X-B", the knot is set in place with bathroom caulk as suggested in a thread on the Shave Nook.

[Image: 2018-10-06%2B19.33.00.jpg]
Finishing the handle took quite some time - not because it was particularly hard to turn, but I had to procure some Forstner Bits, thin CA glue, and not at least find the time in between everything else that have been going on.

[Image: 2018-10-06%2B19.33.09.jpg]
Used my punch set to stamp an A on the bottom. What I'll do when I have not just made versions Alpha, Bravo, Charlie and so on, but also versions Ærlig, Østen og Åse... well.. I guess I have to get some punches with numbers on. Or a laser engraver... either way it'll be a long time before that point is reached.

[Image: 2018-10-06%2B19.33.28.jpg]
The actual knot itself is fairly soft, with a bit of backbone and a pretty decent face feel for not having been broken in. It honestly feels better than my Wilkinson Sword Badger did before I broke it in... but miles away from the lovely Artisania Romera Manchurian Badger that I got from Phil at BullGoose Shaving. To me it's a pretty decent little lathererer, good for an inexpensive brush or for a beginner wetshaver who don't want to sink too much money into a new hobby. It'll be fun to see how the knot develops, in this handle and the ones that are sure to follow.

[Image: 2018-10-06%2B19.33.47.jpg]
Gents... I've taken the first step on a new shaving related journey... I have NO idea where I will end up Biggrin

3 5,695
 10-10-2018, 10:20 PM
  • ischiapp
  • Senior Member
  • Ischia, Naples, Italy
User Info
Nice first step!!

0 1,419
 10-11-2018, 02:40 AM
User Info
Soooooo, not taking orders yet.. Huh 
I want a different handle material, you have to offer more variety... Wink     Cheers

0 747
 10-11-2018, 03:46 AM
User Info
An excellent start Hans.

53 8,119
 10-11-2018, 10:10 AM
  • nikos.a
  • Senior Member
  • Athens, Greece
User Info
Very very nice, Hans!

57 2,300
 10-11-2018, 10:14 AM
User Info
That is one heckuva first step.  The brush looks great.  I can't wait to see where this journey takes you.

0 64
 10-11-2018, 02:58 PM
User Info
Awesome handle. It looks very ergonomic. That definitely looks like a synthetic knot, btw. The crimping of the fibers is common in synthetics.

10 330
 10-12-2018, 12:24 AM
User Info
I guess Chinese badgers have synthetic hair.. after a few uses I'm leaning toward it being a synth, despite a somewhat beastly scent when I opened the package Tongue

3 5,695
 10-12-2018, 02:48 AM
  • chazt
  • Senior Member
  • Queens, NY
User Info
Nice work, Hans. I like it.

10 3,041
 10-12-2018, 03:04 AM
User Info
(10-11-2018, 02:58 PM)Watson15 Wrote: Awesome handle. It looks very ergonomic. That definitely looks like a synthetic knot, btw. The crimping of the fibers is common in synthetics.


3 1,178
Users browsing this thread: 1 Guest(s)