10-12-2018, 07:47 AM
#21
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(10-11-2018, 10:27 PM)WegianWarrior Wrote: I love the look of machined metal... what is the tolerance between the lid and the bowl? Just curious Smile

Good question -it is something that we wrestled with. We did not want to make the tolerance too tight since there will undoubtedly be some soap scum buildup. I'll have to talk with the machinist to get the actual measurement.

48 19,841
Reply
 10-12-2018, 07:55 AM
#22
User Info
(10-12-2018, 07:47 AM)bullgoose Wrote:
(10-11-2018, 10:27 PM)WegianWarrior Wrote: I love the look of machined metal... what is the tolerance between the lid and the bowl? Just curious Smile

Good question -it is something that we wrestled with. We did not want to make the tolerance too tight since there will undoubtedly be some soap scum buildup. I'll have to talk with the machinist to get the actual measurement.

Also worth keeping in mind that anodising will add material to the surface - hard anodising is usually more than 25 μm (0.001") thick, part of which is above the original surface - which should be taken into account. I'm sure your machinist knows all that better than I do though Smile

[Image: andozied.png]

3 5,701
Reply
 10-12-2018, 10:41 AM
#23
  • Garb
  • Active Member
  • Oregon
User Info
This is amazing and just can see how far this has gone since I started on my journey into the world of DE wet shaving.

0 252
Reply
 10-12-2018, 07:50 PM
#24
User Info
That’s simply beautiful...
I’m in !!!


Sent from my iPhone using Tapatalk

2 90
Reply
 10-12-2018, 09:03 PM
#25
  • bijou
  • Senior Member
  • Chicago Illinois
User Info
Any idea of availability and price (ballpark), thanks

54 656
Reply
 10-12-2018, 10:01 PM
#26
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(10-12-2018, 09:03 PM)bijou Wrote: Any idea of availability and price (ballpark), thanks

They go into production on Monday and we hope to have them in about three weeks. They should be in the $75 neighborhood.

48 19,841
Reply
 10-12-2018, 10:01 PM
#27
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(10-12-2018, 10:41 AM)Garb Wrote: This is amazing and just can see how far this has gone since I started on my journey into the world of DE wet shaving.

(10-12-2018, 07:50 PM)Matador Wrote: That’s simply beautiful...
I’m in !!!


Sent from my iPhone using Tapatalk


Thanks guys.

48 19,841
Reply
 10-13-2018, 09:18 AM
#28
  • bijou
  • Senior Member
  • Chicago Illinois
User Info
(10-12-2018, 10:01 PM)bullgoose Wrote:
(10-12-2018, 09:03 PM)bijou Wrote: Any idea of availability and price (ballpark), thanks

They go into production on Monday and we hope to have them in about three weeks. They should be in the $75 neighborhood.

Thank you

54 656
Reply
 10-13-2018, 01:14 PM
#29
  • Asafiev
  • Active Member
  • Lancaster, PA
User Info
This is a very special project.  I look forward to the results!

0 293
Reply
 10-13-2018, 02:07 PM
#30
  • JRRIII
  • Blossoming Addict
  • East Coast
User Info
Looks awesome! Can't wait to see the final product  Sbathroom_grooming_shaving_100-100

12 605
Reply
 Yesterday, 06:25 PM
#31
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(10-12-2018, 07:55 AM)WegianWarrior Wrote:
(10-12-2018, 07:47 AM)bullgoose Wrote:
(10-11-2018, 10:27 PM)WegianWarrior Wrote: I love the look of machined metal... what is the tolerance between the lid and the bowl? Just curious Smile

Good question -it is something that we wrestled with. We did not want to make the tolerance too tight since there will undoubtedly be some soap scum buildup. I'll have to talk with the machinist to get the actual measurement.

Also worth keeping in mind that anodising will add material to the surface - hard anodising is usually more than 25 μm (0.001") thick, part of which is above the original surface - which should be taken into account. I'm sure your machinist knows all that better than I do though Smile

[Image: andozied.png]

Yes, the machinist took this into account.  The bowls should be ready to be sent to be anodized this coming Wednesday. Progress is being made.

48 19,841
Reply
 Yesterday, 07:41 PM
#32
User Info
Will you offer any in the original aluminum finish? it’s very classy

29 1,499
Reply
 Yesterday, 08:04 PM
#33
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(Yesterday, 07:41 PM)mike_the_kraken Wrote: Will you offer any in the original aluminum finish? it’s very classy

It is classy looking but, the untreated finish would scratch too easily. We may offer a silver color down the line but, it would be with an anodized finish.

48 19,841
Reply
 Yesterday, 08:22 PM
#34
User Info
Thanks Phil!

29 1,499
Reply
 Yesterday, 08:24 PM
#35
  • bullgoose
  • The Enabler
  • Redondo Beach, California, U.S.A
User Info
(Yesterday, 08:22 PM)mike_the_kraken Wrote: Thanks Phil!

My pleasure Mike.

48 19,841
Reply
Users browsing this thread: 1 Guest(s)