01-30-2019, 04:37 PM
#21
  • MaxP
  • Senior Member
  • Des Moines, Iowa
User Info
(01-30-2019, 07:42 AM)TheLegalRazor Wrote: zipper raises a good point.  Shipping  it anywhere is a risk.  You can send Bernd pictures and whatever measurements he requests.  He can do the knot and ship it to you.  Installing the knot is easy.

+1

63 1,795
Reply
 01-31-2019, 02:15 AM
#22
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
I have written to Berndt at Shavemac to organise him getting a knot down to me here in Sydney.

No reply yet. I think maybe a week? He might be really busy. I hear good reports, but that he sometimes has email/server issues.

I was thinking a bulb loft of at least 50mm but firmish to overcome any resultant floppiness, given the knot is only 17/18mm. Unsure if 2-band would work or look ok. What would be perfect would be an all-blond loft...but dreaming...

Any thoughts or suggestions?

0 2,060
Reply
 01-31-2019, 06:18 AM
#23
User Info
I believe you would need extremely resilient hair to retain sufficient backbone at 17/18mm x 50mm. Bulb shape would help but maybe not sufficiently if the hair is very soft & flexible. The old Rooney Finest or Plisson HMW hair was of this type and so can be found with high lofts. If the high loft is important you may want to go with Shavemac's D01 2-band which is some thick resilient hair. But it is their most expensive and some have reported a bit a scritch. I've only tried two such knots and they had very strong backbone but no scritch. If these factors/risks are not an issue for you the D01 2-band at 17/18mm x 50mm bulb could work nicely.

46 1,267
Reply
 01-31-2019, 11:36 AM
#24
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(01-31-2019, 06:18 AM)shevek Wrote: I believe you would need extremely resilient hair to retain sufficient backbone at 17/18mm x 50mm. Bulb shape would help but maybe not sufficiently if the hair is very soft & flexible. The old Rooney Finest or Plisson HMW hair was of this type and so can be found with high lofts. If the high loft is important you may want to go with Shavemac's D01 2-band which is some thick resilient hair. But it is their most expensive and some have reported a bit a scritch. I've only tried two such knots and they had very strong backbone but no scritch. If these factors/risks are not an issue for you the D01 2-band at 17/18mm x 50mm bulb could work nicely.

Scritch is no problem for me. In fact, sometimes I like it, Rob. I have quite a few brushes that are already extremely soft, and while it's nice, I don't think, for me at least, it's the ultimate aim or benchmark in assessing a brush's value, worth or quality. Sometimes I like to drive a manual car, too, if you catch what I'm saying. 

Because I spent so little on the handle, I'd gladly pay more for a decent loft. My only issue is its insertion.

I've yet to hear back from Berndt.

0 2,060
Reply
 01-31-2019, 01:25 PM
#25
User Info
I’ve had the same problem Shaun. I’ve tried twice contacting with not hearing back for a month now. Highly unusual.

33 937
Reply
 01-31-2019, 01:35 PM
#26
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(01-31-2019, 01:25 PM)kooshman7 Wrote: I’ve had the same problem Shaun. I’ve tried twice contacting with not hearing back for a month now. Highly unusual.

Just received his reply. Smile All good. 

He advises a Silvertip 2-band (he'll make the knot) which is not quite as stiff as the D01, but firm enough. 

Just awaiting price plus shipping.

0 2,060
Reply
 01-31-2019, 01:55 PM
#27
User Info
(01-31-2019, 01:35 PM)Shaun Wrote:
(01-31-2019, 01:25 PM)kooshman7 Wrote: I’ve had the same problem Shaun. I’ve tried twice contacting with not hearing back for a month now. Highly unusual.

Just received his reply. Smile All good. 

He advises a Silvertip 2-band (he'll make the knot) which is not quite as stiff as the D01, but firm enough. 

Just awaiting price plus shipping.

That’s good. I’ve heard nothing so far.

33 937
Reply
 01-31-2019, 06:19 PM
#28
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
I found this image on an internet search, trying to date the brush. It is from an 1888 Koch's catalogue. It is not exactly the brush, but in terms of style, approximates it reasonably closely. It is the No. 51 brush, second from the top, in badger and bone ($6 per dozen!!!). 

I'm thinking yes, my brush may indeed be from this period. I doubt I shall ever find out who the French maker was, or the exact date, so it will always be a case of speculation until, perhaps by chance, some new evidence comes to light.

See what you think:

[Image: OMVK9mA.jpg]

0 2,060
Reply
 02-12-2019, 04:12 AM
#29
User Info
Congratulations on an amazing find!


Gesendet von iPad mit Tapatalk

0 188
Reply
 02-12-2019, 09:02 AM
#30
User Info
Museum piece if only the knot was in better shape.

0 72
Reply
 02-12-2019, 07:07 PM
#31
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(02-12-2019, 09:02 AM)tubular Wrote: Museum piece if only the knot was in better shape.

Possibly, yes, if there were a museum having even the slightest interest. Either way, it'll stay in my personal museum Wink  and will be re-lofted. Just waiting for a new Shavemac knot to be made and sent. Unsure how long that will take, but I'm in no particular hurry. 

As to museologising and collecting, here's a thread I started  on Jan 1 2015, concerning the shaving brush of nautical man Matthew Flinders:

http://shavenook.com/showthread.php?tid=...t=Flinders

0 2,060
Reply
 02-14-2019, 04:03 PM
#32
User Info
Wow! Amazing find, congratulations!

Enviado do meu Redmi Note 6 Pro através do Tapatalk

2 5,564
Reply
Users browsing this thread: 1 Guest(s)