06-08-2019, 01:41 AM
#1
User Info
If you're using a cartridge razor today, you know that the real cost is not in the razor, but in buying the replacements cartridges. In the same way, and for the same reasons, the real cost of using a DE back in the day was the replacement blades. This created the market for razor blade sharpeners as well as self sharpening razors (the Shake Sharp razors springs to mind). The cost also inspired Bertil Åström of Sweden to invent a simple and non-expensive safety razor;


Quote:The chief object of this invention is to create a simple and non-expensive safety razor uniting the advantages of the ordinary or knife razor and those of the so-called safety razors, while eliminating the disadvantages of the known razors.

In other words, combining the advantage of the straight's everlasting blade with the shaving simplicity of a hoe type safety razor... while at the same time making the razor simple to manufacture, use, and maintain - without a top cap.

Quote:Another object of this invention is to render it possible to remove or to insert the blade in one single operation, i. e. in one single manipulative step [...] while the non-cutting parts remain as a single, assembled aggregate
A further object of this invention is to construct the safety razor in such blade is always automatically exactly centred and kept in its correct position.
A further object of this invention is to construct manner that the a safety razor without any clamping plate on the blade, so that the razor has only a comb-shaped safety plate or guard below the blade.

So that is four things to achieve all at once, and the way Mr Åström went about achieving them is both simple and easy to manufacture. The patent drawing does a pretty good way of explaining it.
[Image: US1980029-drawings-page-1.png]
The whole razor consists of three major parts: A blade of a unique shape with a cut out in the back, a bolt and the handle with attached base plate.... and that's it
The countersunk keyhole in the back of the blade makes for easy assembly and disassembly - the cone shaped head of the bolt easily and repeatedly locates and lock the blade in the correct spot - while the shape of the blade itself do away with the need for a top cap. That is two of the for items taken care of.
According to the patent the thickness of the blade increases the rigidity and reduces blade vibration, which should lead to the edge lasting much longer than the ordinary thin safety razor blades. Mr Åström also claimed that the angle of the edge would result in a very efficient and painless shave.
The keyhole slot also means that one don't have to to unscrew the bolt more than a few threads, leaning it secured to the rest of the razor, while the base plate (referred to as a carrier plate) is permanently fastened to the handle proper. That takes care of the two last items on the list.
To disassemble the razor, all the user have to do is to loosen the nut on the end of the handle and the blade will be free to slide off the carrier plate. To assemble it again after cleaning and/or honing the blade, all the user have to do is to slip the blade in place under the bolt head and tighten the nut. All told as easy as a twist to open DE, and with less parts to keep track of than a three piece safety razor.
The shape of the blade itself is another stroke of genius, and one that isn't explicitly mentioned in the patent text; unlike a straight razor - or the blades used in most wedge-razors - it only needs to be honed on one side. Setting up the edge of a razor blade (or a knife, for that matter) takes a fair bit of skill, but Mr Åström made it a lot simpler with the shape of this blade.
Overall I'm quite impressed with the well though out simplicity of the design. As far as I can see it achieves it's four stated goals, while additionally providing a blade design that would be far easier to maintain than the two sided hollow ground of most straight razors and wedge razors. It is a shame that the design don't seem to have gone beyond the patent (which have expired by now, in case someone has a machine shop...)

3 6,353
Reply
 06-08-2019, 08:42 AM
#2
  • chazt
  • Senior Member
  • Queens, NY
User Info
Another interesting piece of shaving history. Thanks for sharing Smile

14 3,480
Reply
 06-10-2019, 05:19 AM
#3
User Info
Interesting, but I can't figure out what's what in the jumble of drawings. Maybe he should have included a numbered list stating what the parts are. Regardless, thanks for locating it and posting it.

30 1,283
Reply
 06-10-2019, 05:27 AM
#4
User Info
(06-10-2019, 05:19 AM)brothers Wrote: Interesting, but I can't figure out what's what in the jumble of drawings. Maybe he should have included a numbered list stating what the parts are. Regardless, thanks for locating it and posting it.

I find the drawing very easy to read, but that might be in part due to reading the whole thing Tongue

https://patents.google.com/patent/US1980...oq=1980029

B. Åstrøm Wrote:Fig. 1 shows a partial end view of a safety razor in accordance with this invention, some parts being cut away.
Fig. 2 is a top view of the razor.
Fig. 3 is a plan view, in which the back side of the blade is turned upwards.
Fig. 4 shows an end view of the blade.
Fig. 5 is a plan View of the blade.
Fig. 6 shows the carrier plate of which a part is cut away.
Fig. 8 shows the fixing bolt. View of a modified embodiment and the handle,
Fig. 7 shows a top view of the carrier plate.
Fig. 9 is a detail of the bolt head.

3 6,353
Reply
Users browsing this thread: 1 Guest(s)