11-20-2020, 12:51 AM
#1
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
These troublemakers are on their way to me from the UK. Huge brushes, for sure. I couldn't resist!

There is very little information about the P12: can anyone shed any light?

Anyone have any experience using them? I hear they have the same knot at the BK12... but do they?

More pics when they arrive here in Australia.

[Image: dcfmgF7.jpg]

0 2,285
Reply
 11-20-2020, 04:14 AM
#2
User Info
Those brushes are gorgeous! SBAD enabled.

69 2,015
Reply
 11-20-2020, 08:58 AM
#3
User Info
Stunning!!!

0 70
Reply
 11-20-2020, 03:44 PM
#4
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
I did read (somewhere) that the P12 has a bit more backbone than the BK12, but that was from a thread about ten years ago. I’m just wondering if anyone has comparison experience and therefore an informed view?

0 2,285
Reply
 11-20-2020, 04:27 PM
#5
User Info
 11-21-2020, 03:24 AM
#6
User Info
Terrific acquisition, Shaun. But, you don't really need two...hint, hint... Biggrin

88 6,497
Reply
 11-21-2020, 05:47 AM
#7
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(11-21-2020, 03:24 AM)primotenore Wrote: Terrific acquisition, Shaun. But, you don't really need two...hint, hint... Biggrin

Fair enough. I’ll toss one of them into the bin when  I receive them, then. Wink

0 2,285
Reply
 11-22-2020, 04:26 PM
#8
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
As I now understand it, the twins are the earlier versions of the Kent P series, and have a wider knot and shorter loft, hence more backbone. Other than measuring these characteristics when the twins arrive, the Kent logo is the other indicator. 

The later logo, I believe, indicates a slightly less dense knot, but I have no definite proof of this. For interest, I found a picture of the later version of the Kent logo on a plexi sitting next to the earlier version (like mine). This being so, I think my twins may have been made in the late 90s, but I’d love to be corrected on this. If all this is true, I am even luckier!

The P8 in the picture below on the right is the earlier logo. The P12 on the left, the later version. 

The image comes from a posting in the Nook in 2013, and is credited to Vocalistbob: 

[Image: NabJoms.jpg]

0 2,285
Reply
 11-23-2020, 01:29 PM
#9
User Info
(11-21-2020, 05:47 AM)Shaun Wrote:
(11-21-2020, 03:24 AM)primotenore Wrote: Terrific acquisition, Shaun. But, you don't really need two...hint, hint... Biggrin

Fair enough. I’ll toss one of them into the bin when  I receive them, then. Wink
Shocked

88 6,497
Reply
 11-25-2020, 01:19 AM
#10
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
The brushes arrived safely, and have been gently cleaned and left to dry. They shed a few hairs, but I expect this is reasonably normal after sitting unused for around 20 years. 

Knot: 31.5mm
Loft: 55mm

The (current) BK12:

Knot: 31mm
Loft: 64mm

I can therefore conclude that when the later run of P12s occurred (post-2020) the knot was identical to the BK12, and so they shared the taller loft of 64mm, a considerable height difference from the earlier 55mm, hence the frequent description of the later model P12s as being “floppy” or a “mop”. 

With mine having a loft of 55mm, I wouldn’t call them floppy at all... but soft and gentle? Oh yes. Very

These are really good brushes. My luck was definitely in!

Here is a pic of the “first run” Kent P12 with the 55mm loft. Also note the earlier version of the Kent logo.

[Image: hQ6hq0u.jpg]

0 2,285
Reply
 11-27-2020, 08:28 AM
#11
User Info
have an even larger s 12 that is by far my largest

97 1,564
Reply
 11-27-2020, 10:32 AM
#12
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(11-27-2020, 08:28 AM)daveinsweethome Wrote: have an even larger s 12 that is by far my largest
Pictures, please.

0 2,285
Reply
 11-27-2020, 04:11 PM
#13
User Info
(11-27-2020, 10:32 AM)Shaun Wrote: [Image: drRQGZL.jpg]
(11-27-2020, 08:28 AM)daveinsweethome Wrote: have an even larger s 12 that is by far my largest
Pictures, please.

makes a 30 mm plus m and f pale

97 1,564
Reply
 11-27-2020, 04:47 PM
#14
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(11-27-2020, 04:11 PM)daveinsweethome Wrote:
(11-27-2020, 10:32 AM)Shaun Wrote: [Image: drRQGZL.jpg]
(11-27-2020, 08:28 AM)daveinsweethome Wrote: have an even larger s 12 that is by far my largest
Pictures, please.

makes a 30 mm plus m and f pale
A knot of 26mm and loft of 70mm... what is the backbone of the AP12 like?

0 2,285
Reply
 11-28-2020, 07:49 AM
#15
  • chazt
  • Senior Member
  • Queens, NY
User Info
Shaun, there’s something special about the black over clear Lucite combination. Thanks for sharing. Enjoy your new brushes Smile

19 4,622
Reply
 11-28-2020, 01:38 PM
#16
  • Shaun
  • Senior Member
  • St Peters, NSW, Australia
User Info
(11-28-2020, 07:49 AM)chazt Wrote: Shaun, there’s something special about the black over clear Lucite combination. Thanks for sharing. Enjoy your new brushes Smile
Thanks Charlie. Interestingly, the two handles are not identical. They look it, and they are very close, but they are not. They must have been hand crafted? I had never thought how plexi handles for shaving brushes were made; now I am curious. I tried to find out, but my researches yielded nought.

0 2,285
Reply
Users browsing this thread: 1 Guest(s)