The INheRiR 3000 -A Sneak Peek

Back in 2013 when we designed the Asylum Rx, we also designed a smaller head version that takes standard injector blades. We had a resin prototype made of the smaller razor but never pursued it further. That is, until now.

Here is a sneak peak of what we are tentatively calling the INheRiR 3000. I have included a few comparison shots.

Man, I have been waiting for this since the first tease!

The relatively smaller head design looks well proportioned, Phil.

(04-19-2022, 07:01 AM)chazt Wrote: The relatively smaller head design looks well proportioned, Phil.

Thank you Charlie!

what a beauty!

Any idea of what it's weight might turn out to be?

(04-19-2022, 09:16 AM)hillbillyreverend Wrote: what a beauty!    

Any idea of what it's weight might turn out to be?

Thank you!

I'll have to weigh it when I get back into the shop. I meant to do so yesterday evening but forgot.

Looks like a razor with real potential.

Thanks for seeing it along.

(04-19-2022, 10:11 AM)MaxP Wrote: Looks like a razor with real potential.  

Thanks for seeing it along.

Thank you Max. I just finished my first shave with the prototype and I am really happy with how it performed. I had two days worth of growth and want to see how it follows up tomorrow with normal growth. It is definitely nimble.

A modern, stainless steel injector razor made in the USA.  This is big.

(04-19-2022, 09:16 AM)hillbillyreverend Wrote: what a beauty!    

Any idea of what it's weight might turn out to be?

The INheRiR weighs 99g (3.5 Oz) unloaded.

(04-19-2022, 11:58 AM)bullgoose Wrote:

(04-19-2022, 09:16 AM)hillbillyreverend Wrote: what a beauty!    

Any idea of what it's weight might turn out to be?

The INheRiR weighs 99g (3.5 Oz) unloaded.

Excellent news. Substantial but not too much for arthritic fingers 

Someone - say that name out loud.  

That and the bird dookie in the pic above makes me think someone is having a bit of fun here.

(04-19-2022, 11:58 AM)bullgoose Wrote:

(04-19-2022, 09:16 AM)hillbillyreverend Wrote: what a beauty!    

Any idea of what it's weight might turn out to be?

The INheRiR weighs 99g (3.5 Oz) unloaded.

Thanks Phil!

I enjoy my injectors most of all and was disappointed that only Supply has attempted to do anything with them.  The Minigoose was a very good try, but as I prefer razors with a combined weight of less than 60g it turned out to be too heavy.   

I wish you much success with the introduction of this beauty!

(04-20-2022, 11:49 AM)hillbillyreverend Wrote:

(04-19-2022, 11:58 AM)bullgoose Wrote:

(04-19-2022, 09:16 AM)hillbillyreverend Wrote: what a beauty!    

Any idea of what it's weight might turn out to be?

The INheRiR weighs 99g (3.5 Oz) unloaded.

Thanks Phil!

I enjoy my injectors most of all and was disappointed that only Supply has attempted to do anything with them.  The Minigoose was a very good try, but as I prefer razors with a combined weight of less than 60g it turned out to be too heavy.   

I wish you much success with the introduction of this beauty!

Thank you. 60g is very light. I don't think it would be possible with stainless steel. You could hollow out the handle but, that would throw off the balance.

(04-19-2022, 10:46 AM)TheLegalRazor Wrote: A modern, stainless steel injector razor made in the USA.  This is big.

I don’t think anyone else is doing this now. Supply seems to have completely embraced zamak. As far as I can see there are no longer stainless steel razors shown. This is from their website:

Why Alloy?

Our razors are made from die-cast zinc alloy, coated with aerospace grade PVD chrome. It let's us offer you multiple finishes on your Single Edge razor.

Mhmm.. a razor that uses a blade I already got in my rotation? You're sorely tempting me there Phil

(04-20-2022, 10:29 PM)WegianWarrior Wrote: Mhmm.. a razor that uses a blade I already got in my rotation? You're sorely tempting me there Phil

Excellent! 

In anticipation of this new injector razor, I used my Schick Type I today, reinforcing the injector muscle memory which is much different for me than DE.

(04-21-2022, 11:37 AM)chazt Wrote: In anticipation of this new injector razor, I used my Schick Type I today, reinforcing the injector muscle memory which is much different for me than DE.

Perfect. I just approved the prototype today and we are moving ahead to production. I should be ready to release them by late June.